Planet WGSW-20160HP - Snmp-Server Engine-ID; Snmp-Server Host

Command Guide
-302-
Default:
None
Usage Guide:
To configure the sysContact string of SNMP
Example:
To configure the sysContact string (Server123) of SNMP
Switch# configure terminal
Switch (config)# snmp-server contact Server123
4.2.211 snmp-server engine-id
Command:
snmp-server engine-id local <Engineid : word10-32>
snmp-server Set SNMP server's configurations
engine-id Set SNMP engine ID
local Set SNMP local engine ID
<Engineid : word10-32> local engine ID
Default:
None
Usage Guide:
To configure the Engine IDof SNMP
Example:
To configure the Engine ID (1234567890) of SNMP
Switch# configure terminal
Switch (config)# snmp-server engine-id local 1234567890
4.2.212 snmp-server host
Command:
snmp-server host <conf_name>
snmp-server Set SNMP server's configurations
host Set SNMP host's configurations
<conf_name> Name of the host configuration