Planet WGSW-20160HP - Editing

Command Guide
-223-
4.2.103.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.103.2 editing
Command:
editing
editing Enable command line editing
Default:
Enabled
Usage Guide:
To allow user editing command line.
Example:
To allow user editing command line.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# editing