Planet WGSW-20160HP - Default Range; Description

Command Guide
-214-
Usage Guide:
To enter IPMC profile mode
Example:
To enter IPMC profile mode (planet)
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)#
4.2.94.1 default range
Command:
default range <EntryName : word16>
default Set a command to its defaults
range A range of IPv4/IPv6 multicast addresses for the profile
<EntryName : word16> Range entry name
Default:
None
Usage Guide:
To default IPMC Profile Rule for specific IPMC Profile
Example:
To default IPMC Profile Rule (Entry 1) for specific IPMC Profile (planet)
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)# default range 1
4.2.94.2 description
Command:
description <ProfileDesc : line64>
description Additional description about the profile
<ProfileDesc : line64> Description for the designated IPMC filtering profile