Planet WGSW-20160HP - Spanning-Tree Auto-Edge; Spanning-Tree Bpdu-Guard

Command Guide
-311-
Example:
To disable the function (spanning-tree auto-edge)
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# no spanning-tree auto-edge
4.2.213.5 spanning-tree auto-edge
Command:
spanning-tree auto-edge
spanning-tree Spanning Tree protocol
auto-edge Auto detect edge status
Default:
Enabled
Usage Guide:
To enable the Auto Edge of CIST Aggregated Port
Example:
To enable the Auto Edge of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree auto-edge
4.2.213.6 spanning-tree bpdu-guard
Command:
spanning-tree bpdu-guard
spanning-tree Spanning Tree protocol
bpdu-guard Enable/disable BPDU guard
Default:
Disabled
Usage Guide:
To enable the BPDU Guard of CIST Aggregated Port