Planet WGSW-20160HP - Lldp Timer; Lldp Transmission-Delay

Command Guide
-235-
<1-10> 1-10 seconds.
Default:
2
Usage Guide:
To configure Tx re-initialization delay time of LLDP
Example:
To configure Tx re-initialization delay time (5) of LLDP
Switch# configure terminal
Switch (config)# lldp reinit 5
4.2.113 lldp timer
Command:
lldp timer <5-32768>
lldp LLDP configurations.
timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds)
<5-32768> 5-32768 seconds.
Default:
30
Usage Guide:
To configure Tx interval time of LLDP
Example:
To configure Tx interval time (555) of LLDP
Switch# configure terminal
Switch (config)# lldp timer 555
4.2.114 lldp transmission-delay
Command:
lldp transmission-delay <1-8192>
lldp LLDP configurations.