Planet WGSW-20160HP - Terminal; Terminal Editing; Terminal Exec-Timeout

Command Guide
-431-
4.22 terminal
4.22.1 terminal editing
Command:
terminal editing
terminal Set terminal line parameters
editing Enable command line editing
Default:
Enabled
Usage Guide:
To enable editing mode for current terminal session.
Example:
To enable editing mode for current terminal session.
Switch # terminal editing
4.22.2 terminal exec-timeout
Command:
terminal exec-timeout <min> [ <sec> ]
terminal Set terminal line parameters
exec-timeout Set the EXEC timeout
<min> Timeout in minutes
<sec> Timeout in seconds
Default:
N/A
Usage Guide:
To configure idle timeout of EXEC mode for current terminal session.
Example:
To configure idle timeout with 500 minutes of EXEC mode for current terminal session.
Switch # terminal exec-timeout 500