Planet WGSW-20160HP - Ipv6 Mld Snooping Query-Interval; Ipv6 Mld Snooping Query-Max-Response-Time

Command Guide
-185-
4.2.66.24 ipv6 mld snooping query-interval
Command:
ipv6 mld snooping query-interval <IpmcQi : 1-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
query-interval Query Interval in seconds
<IpmcQi : 1-31744> 1 - 31744 seconds
Default:
125
Usage Guide:
To configure Querier-interval of MLD snooping for specific VLAN
Example:
To configure Querier-interval (600 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping query-interval 600
4.2.66.25 ipv6 mld snooping query-max-response-time
Command:
ipv6 mld snooping query-max-response-time <IpmcQi : 1-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
query-max-response-time Query Response Interval in tenths of seconds
<IpmcQri : 0-31744> 0 - 31744 tenths of seconds
Default:
125
Usage Guide:
To configure Querier-interval of MLD snooping for specific VLAN
Example:
To configure Querier-interval (60 seconds) of MLD snooping for VLAN X