Planet WGSW-20160HP - Spanning-Tree Restricted-Tcn; Switchport Vlan Mapping

Command Guide
-315-
4.2.213.12 spanning-tree restricted-tcn
Command:
spanning-tree restricted-tcn
spanning-tree Spanning Tree protocol
restricted-tcn Restrict topology change notifications
Default:
Disabled
Usage Guide:
To enable the Restricted TCN of CIST
Example:
To enable the Restricted TCN of CIST
Switch# configure terminal
(config)# spanning-tree aggregation
(config-stp-aggr)# spanning-tree restricted-tcn
4.2.214 switchport vlan mapping
Command:
switchport vlan mapping <group> <vlan_list> <translation_vlan>
switchport Set switching mode characteristics
vlan vlan - Vlan translation
mapping Add VLAN translation entry into a group
<group id : 1-29> Group id
<vlan_list> VLAN list
< translation_vlan > translation VLAN ID
Default:
None
Usage Guide:
To configure the VLAN Translation
Example:
To enable the VLAN Translation (below table)