Planet WGSW-20160HP - Show Ipv6 Statistics

Command Guide
-386-
4.21.58 show ipv6 statistics
Command:
show ipv6 statistics [ system ] [ interface vlan <vlan_list> ] [ icmp ] [ icmp-msg
<type> ]
show Show running system information
ipv6 IPv6 configuration commands
statistics Traffic statistics
icmp IPv6 ICMP traffic
icmp-msg IPv6 ICMP traffic for designated message type
<Type : 0~255> ICMP message type ranges from 0 to 255
interface Select an interface to configure
vlan IPv6 interface traffic
system IPv6 system traffic
Default:
N/A
Usage Guide:
To display the IPv6 statistics.
Example:
To display the IPv6 statistics.
Switch # show ipv6 statistics
IPv6 statistics:
Rcvd: 24 total in 2064 bytes
6 local destination, 0 forwarding
0 header error, 0 address error, 0 unknown protocol
0 no route, 0 truncated, 18 discarded
Sent: 34 total in 2208 bytes
38 generated, 0 forwarded
0 no route, 0 discarded
Frags: 0 reassemble (0 reassembled, 0 couldn't reassemble)
0 fragment (0 fragmented, 0 couldn't fragment)
0 fragment created
Mcast: 24 received in 2064 bytes
34 sent in 2208 bytes
Bcast: 0 received, 0 sent