Planet WGSW-20160HP - Dot1 X Authentication Timer Re-Authenticate; Dot1 X Feature; Dot1 X Guest-Vlan

Command Guide
-70-
4.2.28 dot1x authentication timer re-authenticate
Command:
dot1x authentication timer re-authenticate <1-3600>
Default:
Re-authenticated Period: 3600
Usage Guide:
To set the Re-authenticated Period for Network Access Server.
Example:
To set the Re-authenticated Period (777 seconds).
Switch# configure terminal
Switch (config)# dot1x authentication timer re-authenticate 777
4.2.29 dot1x feature
Command:
dot1x feature guest-vlan | radius-qos | radius-vlan
Default:
Disable
Usage Guide:
To enable the guest-vlan, radius-qos, radius-vlan for Network Access Server
Example:
To enable the guest-vlan, radius-qos, radius-vlan for Network Access Server.
Switch# configure terminal
Switch (config)# dot1x authentication timer re-authenticate 777
4.2.30 dot1x guest-vlan
Command:
dot1x guest-vlan <1-4095>