Planet WGSW-20160HP - Show Vlan Mac; Show Vlan Protocol

Command Guide
-427-
Switch # show vlan ip-subnet
VCE ID IP Address Mask Length VID Interfaces
------ --------------- ----------- ---- ----------
1 192.168.78.0 24 5 GigabitEthernet 1/1
4.21.106 show vlan mac
Command:
show vlan mac [ address <mac_addr> ]
show Show running system information
vlan VLAN status
mac Show VLAN MAC entries
address Show a specific MAC entry
Default:
N/A
Usage Guide:
To display the MAC-based VLAN information.
Example:
To display the MAC-based VLAN information.
Switch # show vlan mac
MAC Address VID Interfaces
----------- --- ----------
00-40-55-00-00-00 1 GigabitEthernet 1/1
4.21.107 show vlan protocol
Command:
show vlan protocol [ eth2 { <etype> | arp | ip | ipx | at } ] [ snap { <oui> | rfc-1042 |
snap-8021h } <pid> ] [ llc <dsap> <ssap> ]
show Show running system information
vlan VLAN status
protocol Protocol-based VLAN status
eth2 Ethernet protocol based VLAN status
<etype> Ether Type(Range: 0x600 - 0xFFFF)
arp Ether Type is ARP