Planet WGSW-20160HP - Mvr Vlan <Vlan_List> Igmp-Address; Mvr Vlan <Vlan_List> Last-Member-Query-Interval

Command Guide
-264-
Default:
Enabled
Usage Guide:
To enable the IGMP/MLD frame tagged of MVR VLAN
Example:
To enable the IGMP/MLD frame tagged of MVR VLAN (123)
Switch# configure terminal
Switch (config)# mvr vlan 123 tagged
4.2.160 mvr vlan <vlan_list> igmp-address
Command:
mvr vlan <vlan_list> igmp-address <ipv4_ucast>
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan
<vlan_list> MVR multicast VLAN list
igmp-address MVR address configuration used in IGMP
<ipv4_ucast> A valid IPv4 unicast address
Default:
0.0.0.0
Usage Guide:
To configure the MVR address of MVR VLAN
Example:
To configure the MVR address (192.168.0.55) of MVR VLAN (123)
Switch# configure terminal
Switch (config)# mvr vlan 123 igmp-address 192.168.0.55
4.2.161 mvr vlan <vlan_list> last-member-query-interval
Command:
mvr vlan <vlan_list> last-member-query-interval <IpmcLmqi : 0-31744>
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan