Planet WGSW-20160HP - Ipv6 Mld Snooping Last-Member-Query-Interval; Ipv6 Mld Snooping Priority

Command Guide
-183-
Default:
Auto
Usage Guide:
To configure MLD snooping version for specific VLAN
Example:
To configure MLD snooping V2 for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping compatibility v2
4.2.66.21 ipv6 mld snooping last-member-query-interval
Command:
ipv6 mld snooping last-member-query-interval <IpmcLmqi : 0-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
last-member-query-interval Last Member Query Interval in tenths of seconds
<IpmcLmqi : 0-31744> 0 - 31744 tenths of seconds
Default:
10
Usage Guide:
To configure Last-member-query-interval of MLD snooping for specific VLAN
Example:
To configure Last-member-query-interval (100 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping last-member-query-interval 1000
4.2.66.22 ipv6 mld snooping priority
Command:
ipv6 mld snooping priority <CosPriority : 0-7>