EasyManua.ls Logo

Plum MacBAT 5 - APN Settings

Plum MacBAT 5
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F-20
MacBAT 5 USER GUIDE. Version 1.0
c) APN settings
Schedules require separate settings for APN
credentials. General settings for APN have no meaning
while schedule is executed. Various SIM cards can work
within separate APNs, e.g. separate settings for private
billing system and FTP in public network.
APN must be always programmed correctly. Without
APN settings schedule will not work, or work wrong.
d) NTP settings
Demand to synchronize the time with NTP server.
Address of NTP must be working inside the
programmed in previous step APN. Can be turned off if
NTP is not used.
e) TCP settings connection mode
Guide is related to the device with firmware series S007.12. Within this firmware only PULL mode is available for the
schedule.

Table of Contents