Polaris Sportsman 850 - Page 210

5.6
2. Remove the fasteners securing the side panels.
3. Remove the upper side panels.
4. Remove the fasteners securing the rear cab rack and
storage assembly to the chassis.
5. Remove the fastener retaining the PVT duct.
6. Remove the Left Rear wheel.
7. Remove the left rear wheel.
8. Remove the lower LH frame support.
9. Loosen the clamp
q
retaining the PVT Duct
w
to the
PVT Housing.
10.Loosen the clamp securing the rubber duct
w
to the
plastic duct
e
.
11. Remove the rubber boot
w
between the PVT housing
and plastic duct.
12.Lift the rear cab and storage compartment and
support them with a block of wood or similar non
marring material.
13.Remove the plastic PVT duct.
14.Remove the outer PVT cover and drive belt.
PVT SYSTEM