Customizing the Local Interface
Topics:
• Change the Background Image on the Home Screen
• Change the Startup Image on the Home Screen
• Set Up the Address Bar
These topics describe how to configure your system by using the configuration screens on the local
interface. If you are in the room with the system, you can navigate the screens and enter information by
using the remote control and the onscreen keyboard. When you reach a text field, press the Select button
on the remote control to display the onscreen keyboard. Note that the onscreen keyboard is automatically
displayed when you reach the System Name field in the setup wizard.
Be aware that only those configuration screens needed to get the system connected are included in the
local interface. Most of the administrative settings are available only in the system web interface.
In the system's local interface, go to > Settings > Administration. The local interface has a subset of
the administration settings that are available in the system web interface.
When a RealPresence Group Series system is paired with a Polycom Touch Control, the following
statements are true:
• You can change the system's configuration using the system web interface only.
• During pairing, when prompted to enter the Admin ID and Admin Password, but no Admin password
has been configured, you must submit a blank password.
If you enable a provisioning service, any settings provisioned by the RealPresence Resource Manager
system might be displayed as read-only settings in the system web interface Admin Settings. For more
information about automatic provisioning, refer to the RealPresence Resource Manager system
documentation at support.polycom.com.
Change the Background Image on the Home Screen
You can upload a custom image to display as the background of all monitors for a multi-screen system or
on the main monitor of a single RealPresence Group Series system. The image must have a pixel size of
1920 x 1080 (width by height) in a .jpg file format, and a file size less than 5 MB.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > Home Screen
Settings > Background.
2. Browse to the desired image file and click Choose File > Upload.
The custom image displays on the main monitor or monitors.
Related Links
Change the Background Image on page 226
Polycom, Inc. 209
To Next Page
Loading...
Need help?
General
