Audio and Video Tests
You can perform audio and video diagnostic tests on your system.
Diagnostic Screen Description
Speaker Test Tests the audio cable connections. A 473 Hz tone
indicates that the local audio connections are correct.
If you run a test during a call, people on the far site also
hear the test tone.
Audio Meters Measures the strength of audio signals from
microphones, far-site audio, and any device connected
to the audio line in.
Meters function only when the associated input is
enabled.
Note: Some audio meters are unavailable when a
SoundStructure digital mixer is connected to
the room system.
Troubleshooting
Polycom, Inc. 276
To Next Page
Loading...
