Procedure
1. In the RealPresence Touch web interface, go to Admin Settings > Servers > Directory Servers.
2. Configure the following settings:
Directory Servers
Supported
Authentication
Protocols
Global Directory Groups
Entry Calling
Information
Microsoft
Skype for Business
Server 2015
NTLM v2 only Contact groups but not
distribution lists
Might include:
• SIP address (SIP URI)
LDAP
with H.350 or Active
Directory
Any of the following:
• NTLM v2 only
• Basic
• Anonymous
Not Supported Might include:
• 323 IP address (raw
IPv4 address, DNS
name, H.323 dialed
digits, H.323 ID, or H.
323 extension)
• SIP address (SIP URI)
• ISDN number
• Phone number*
Polycom GDS Proprietary Not Supported Might include:
• 323 IP address (raw
IPv4 address, DNS
name, or H.323
extension)
• ISDN number
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
You can configure the system to use the following directory server when the system is
automatically provisioned by a RealPresence Resource Manager system.
Directory Servers
Supported
Authentication Protocol Global Directory Groups
Entry Calling
Information
Skype for Business
Server 2015
NTLM v2 only Contact groups but not
distribution lists
Might include:
• SIP address (SIP URI)
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
Setting Up a Polycom RealPresence Touch Device
Polycom, Inc. 227
To Next Page
Loading...
Need help?
General
