Polycom realpresence group series Administrator's Guide

Setting Description
Enable SNMP Enables administrators to monitor the system remotely
using SNMP.
Enable Legacy Notifications Supports sending notifications compatible with the
legacy MIB.
Enable New Notifications Supports sending notifications compatible with the new
MIB.
Version1 Enables your system to use the SNMPv1 protocol.
Version2c Enables your system to use the SNMPv2c protocol.
Version3 Enables your system to use the SNMPv3 protocol.
Enabled by default, you can’t configure other SNMPv3
settings unless this is on.
Read-Only Community Specifies the SNMP community string for your system.
For security reasons, don’t use the default community
string (public).
Note: Polycom doesn’t support SNMP write
operations for configuring or provisioning
systems. The community string is for read
operations and outgoing SNMP traps.
Contact Name Specifies the name of the person responsible for
remotely managing the system.
Location Name Specifies the system location.
System Description Provides details about the system.
User Name Specifies the User Security Model (USM) account
name for SNMPv3 message transactions. The
maximum length is 64 characters.
Authentication Algorithm Specifies the type of SNMPv3 authentication algorithm
used.
• SHA
• MD5
Authentication Password Specifies the SNMPv3 authentication password. The
maximum length is 48 characters.
Privacy Algorithm Specifies the cryptographic privacy algorithm for
SNMPv3 packets.
• CFB-AES128
• CBC-DES
System Maintenance
Polycom, Inc. 263

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English