Polycom realpresence group series

automatically configured and provisioned according to the service provider's parameters. If needed, you
can enable and configure RealPresence Cloud mode in the system web interface.
Enable RealPresence Cloud Mode
If your RealPresence Group Series system was not automatically configured and provisioned, you can
enable and configure RealPresence Cloud mode in the system web interface.
Procedure
1. In the system web interface, go to Admin Settings > Servers > Provisioning Service.
2. At Enable Provisioning, select the checkbox.
3. At Server Type, select CLOUD.
4. Click Save.
The registration status changes to Registered after 1 to 2 minutes.
Using a Provisioning Service
Polycom, Inc. 38