Pregis SHARP MAX 1143 - Machine Specifications; Packaging Specifications

MAX™ Operator Manual
©
Original Printed In English
PACKAGING SPECIFICATIONS
Table 1-5A. 1143 Packaging Specifications.
Table 1-5B. 1145 Packaging Specifications.
MACHINE SPECIFICATIONS
Table 1-5B. Machine Specifications
**
Power source for CE versions only.
^ Weight depends on installed options and model of bagger.
* Sealing options, size of package, along with weight and size of product will cause rate to vary.
SECTION 1 - INTRODUCTION
SPECIFICATIONS
1-5
BAG WIDTH BAG LENGTH FILM GAUGE
MINIMUM
2” (5.1 cm) 3.5” (8.9 cm) .001” (1 mil) 25 Microns
MAXIMUM
12” (30.5 cm) 32” (101.6 cm) .004” (4 mil) 100 Microns
POWER
(SOURCE)
WEIGHT AIR REQUIREMENT SPEED OPERATING TEMP HUMIDITY RANGE
115VAC 50/60 Hz,
10 Amps
**230VAC 1Phase,
5 Amp, 50-60 Hz
Est. 500
lbs.^
(227 kg)
80 PSI (5 SCFM)
(5.5 Bar)
50 Bags per
Minute*
32° - 140° F
0° – 40° C
10% - 90% RH Non-
Condensing
BAG WIDTH BAG LENGTH FILM GAUGE
MINIMUM
2” (5.1 cm) 4.5” (11.4 cm) .001” (1 mil) 25 Microns
MAXIMUM
20” (50.8 cm) 32” (101.6 cm) .004” (4 mil) 100 Microns