MAX™ Operator Manual
©
Original Printed In English
SECTION 4 - HMI SCREENS
MACHINE OPTIONS SCREEN - CONTINUED
4-15
Bag Open Assist - This will open the Bag Open Assist configuration screen. Bag Open Assist includes high/low
pressure air, bag open sensor, and vacuum assist.
Trim Seal - This will open the Trim Seal configuration screen. This option is used to simultaneously seal and trim
excess bag material.
Bag Open Fingers - This will open the Bag Open Fingers configuration screen. This option is found on the Max
20 with 10” pass-thru equipped with Pressure Bar mounted vacuum open.
VFD Unwind - This will open the VFD Unwind configuration screen.
Figure 4-15A. Machine Options Screen.
To Next Page
Loading...
