ProntoNetLC User Manual
119
VI.6.4 MULTI-UNICAST
34
MULTI-UNICAST allows the user to establish point to multi-point connections by
means of unicast connections. The same audio (one encoder) can be sent up to
10 different locations concurrently. This functionality overcomes the lack of
Multicast support on some networks.
To select this new feature, open the new ‘NET’ menu by clicking on the ‘NET’
button at the top on the left in the web page.
The main window will show all the available connections:
Depending on the compression mode, up to 10 Tx connections will be available:
• MPEG L2, L3 and AAC: Up to 10 Tx + 1 Rx.
• PCM, G711, G722, APTX: Up to 3 Tx + 1 Rx.
34
MULTI-UNICAST operation mode is available under lice
To Next Page
Loading...
