ProntoNetLC User Manual
155
Updating the firmware
It is posible to update several units at once with the HeraFlashPlus
utility. The unit configuration won’t be lost when updating.
By using HeraFlashPlus version 2.5.0 or higher, the upgrading can be
performed over WAN networks, such as Internet.
From version 5.4.1 onwards, all Prodys IP codecs will share the same
firmware file, making it more easier to upgrade several different units
to the latest firmware version.
To update the firmware of a defined unit follow these steps:
1. Start up the HERAFlashPlus application.
2. Click on browse and select the file with the new firmware version.
To Next Page
Loading...
