ProntoNetLC User Manual
26
D 1 : M P L 2 - 6 4 - S T - 4 8
D 2 : N O T A V A I L A B L E
E 1 : M P L 2 - 6 4 - M N - 4 8 -
E 2 : G 7 2 2
III.2.2.3. Screen 3: Decoding algorithm
This window shows the algorithm that is selected and synchronised for Decoder
1 and 2 (number 2 is only relevant when ProntoNetLC is working as a DUAL
codec). Here are some examples:
.
If the Decoder is not synchronised it will show the text “SEARCHING”
The different algorithms are written in the following way:
PCM – Mode - Sample Rate – number of bits.
G711 – Law.
G722.
MPEG Layer II – Bit rate – Mode – Sample Rate – CRC.
MPEG Layer III – Bit rate – Mode – Sample Rate – CRC.
Note: Other algorithms such as Mpeg AAC LC, LD or HE can be
provided under license.
III.2.2.4. Screen 4: Encoding algorithm
This is similar to the Decoder described above, but it will describe the encoding
algorithm instead.
The different algorithms are displayed in the same way as the Decoder
outlined above.
D 1 : M P L 2 - 0 6 4 - M N - 4 8
D 2 : G 7 2 2
To Next Page
Loading...
