ProntoNetLC User Manual
41
IV.5 Configuration of Encoder 2
NOTICE – ENCODER2 RESTRICTIONS
Only available if NET = IP and Double Mode is set.
Only G722 mode is available over IP.
For the Encoder 2 the following options are available:
AUT : Automatic Mode. This means that the Encoder adopts the same mode
as the Decoder. (This is equivalent to the automatic dependent mode of the
Pronto 3).
G711 : Compatible with the telephone standard.
G722 : Low delay Algorithm appropriate for high quality voice.
MPL2 : MPEG 1,2 Layer II.
MPL3 : MPEG 1,2 Layer III.
Note: Other compression modes such us MPEG AAC LC, LD and HE can
be provided under license.
To Next Page
Loading...
