ProntoNetLC User Manual
53
< < B O O K I N D E X [ 0 1 ] > >
B O O K I N D E X [ 0 1 ]
{ E D I T } D E L E T E
B O O K E D I T O R [ 0 1 ]
{ I P } E N C 1 E N C 2
I P 1 : -
I P 2 : -
IV.6.4 CONF-BOOK
This is where you edit Address Book entries. There are three fields for each
entry – number/numbers (max 2) to call over IP, address for connecting to, and
the Encoder modes for Encoder 1 and/or 2. There are a total of 64
21
entry slots
available. Once you have selected BOOK from the menu you program entries in
the following way:
Firstly, you must select one of the entry positions with the right/left keys:
Pressing OK you enter the
selected entry slot, and from
there you can add or modify data using EDIT, or delete data using DELETE.
On pressing EDIT the
different fields appear for editing:
IP: This is where you add the IP address you wish to call when this entry is
chosen from the Address Book.
ENC1 and ENC2: Here you can select the algorithm that will be set up for
Encoder 1 (or Encoders 1 and 2) when an entry is selected from the Address
Book. By selecting, the algorithm currently configured the display will show
the options available to change it (CHANGE).
21
Before version 5.2.1, the number of available entries was 32.
To Next Page
Loading...
