ProntoNetLC User Manual
77
ProntoNetLC external protocol: The ProntoNet Family Software
Development Kit provides a tool to manage Prodys units from external
applications or devices different than ProdysControl. In this manner, it is
possible to customize the control of the units and to integrate them in a
global management system.
The protocol is based on which can be managed through two different
communication ports: the LAN port and the RS232 B port. For more
information, please read ProntoNet SDK User’s Manual.
IP Codec Mode: There are two different operation modes: SIMPLE and
DOUBLE mode. In SIMPLE mode, the unit will work as usual, that means, it
cannot establish two independent communications via IP. In DOUBLE mode,
the unit can establish two independent communications via IP.
In DOUBLE mode over IP, the following restrictions will be applied:
1.- Encoder 1 and Encoder 2 can only be set in MONO.
2.- Encoder 2 (assigned to line 2) can only be set in G722.
Buzzer: It is possible to enable/disable the buzzer from this option. The
buffer warns the user about incoming calls.
V.1.3.1. TimeDate
This option allows to synchronize time and date by using SNTP protocol (Simple
Network Time Protocol). SNTP operates always in the client-server model and for
this reason, ProntoNetLC can work as SNTP server or SNTP client.
To Next Page
Loading...
