ProntoNetLC User Manual
8
Introduction
ProntoNetLC
expands the PRODYS IP range of audio codecs family. It is based
on the features provided in ProntoNet.
ProntoNetLC
is a multi-algorithm
stereo audio codec over IP, supporting many industry standard coding
algorithms such as; G722, MPEG1/2 LayerII, MPEG1/2 LayerIII as well as
uncompressed linear audio (PCM). Other compression modes can be provided as
options.
Each
ProntoNetLC
fully supports IP (TCP and UDP), connecting via a
10BaseT/100Base-TX Ethernet port (RJ45 connector). This enables remote
monitoring/configuring and data/audio transportation over data communication
links (LAN, Wan, Internet…).
About this manual
The information is arranged in the following sections:
Chapter II – Installation Guide.
This chapter provides hardware requirements and instructions for installing
the ProntoNetLC unit.
Chapter III – The Front Panel.
ProntoNetLC can be configured and controlled from the controls located on its
frontal panel. This chapter describes all of the features and controls of the
ProntoNetLC Front panel.
Chapter IV – The menu.
This chapter describes how to use the front panel buttons and LCD screen to
move through the menus. It describes each menu path and its associated
options and parameters.
Chapter V – The remote control.
ProntoNetLC can be controlled from a Web Browser. This chapter describes
how to start it and how to use it.
Chapter VI – How does the ProntoNetLC work?
To Next Page
Loading...
