Promise Technology Vess R3600 Series - Page 207

Examples
battery
Usage
battery [-a <action>] [-b <batId>]
battery -a recondition -b <batId>
Summary
Battery is used to display the current status of a battery indicating the percentage of charge left.
This command is also used to recondition a battery. Reconditioning of a battery attempts to fully discharge, and
then recharge it. In addition the battery will be reconditioned automatically once per month.
-a <action> Which action to perform.
list (Default) List information for all batteries or a specic battery unit.
recondition Recondition a specic battery.
-b <battery ID> Used to specify which battery in a given enclosure.
battery
battery -a recondition -b 1
187
Promise Technology Managing with CLI