Promise Technology Vess R3600 Series - Hanging Http S Ettings

Changing HTTP Settings
To change the HTTP settings on the selected NAS share, access the HTTP Settings menu and congure the
following:
• Enable/Disable: Click the Enable box to checkmark the box if you want to enable the HTTP service. Click
to remove the checkmark to disable HTTP service.
• HTTP: Change the port number used for mounting HTTP serivce on the NAS share. Default is port 8088.
• HTTPS: Change the port number used for HTTPS service. Default is 8089.
HTTP Sengs
75
Promise Technology Management with WebPAM PROe