Promise Technology Vess R3600 Series User Manual

SLP Service
Service Location Protocol (SLP) discovers services over the Internet. SLP applies to IPv4 protocol only.
Stopping SLP Service
To stop the SLP service:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SLP service and select the Stop option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
To start the SLP service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the gear icon for SLP service and choose the Start option.
Restarting SLP Service
To restart the SLP service:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SLP service and select the Restart option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
143
Promise Technology Management with WebPAM PROe

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English