Promise Technology Vess R3600 Series - Making Iscsi Target Settings

Making iSCSI Target Settings
To make target settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Target tab.
4. Click the target you want, then click the Modify button.
5. Make settings changes are required:
• Alias
• Enable/Disable Keep Alive
• Enable/Disable Header Digest
• Enable Data Digest
• Enable Bi-directional CHAP Authentication
• Enable Uni-directional CHAP Authentication
6. Click the Save button.
Viewing a List of iSCSI Sessions
To view a list of iSCSI sessions:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Session tab.
iSCSI session information includes:
• ID – ID number of the session
• Controller ID - Controller 1 or 2
• Target Alias – Alias of the target
• Initiator Alias – Part of the IQN
• IO Portal ID – ID number of the portal
• IO Portal IP - IP address of the portal
• Status – Active or inactive.
130
Promise Technology Vess R3600 / Vess J3600 Product Manual