Restarting the Subsystem
This function shuts down the subsystem and then restarts it.
To restart the subsystem:
1. Click the Device tab.
2. Click the Overview icon.
3. Click the Shutdown/Restart Subsystem button.
4. Choose the Apply to option, Subsystem, Controller 1 or Controller 2.
5. Click the Restart button.
6. Type the word “conrm” in the eld provided.
7. Click the Conrm button.
When the controller shuts down, your WebPAM PROe connection is lost.
8. Wait at least two minutes.
9. In your browser, click Logout in the WebPAM PROe Header, then log in again.
If you cannot log in immediately, wait 30 seconds and try again.
95
Promise Technology
Management with WebPAM PROe
To Next Page
Loading...
