Promise Technology Vess R3600 Series - Hanging Ftp S Ettings

Changing FTP Settings
To change the settings for FTP on the selected NAS share, access the FTP Settings menu and congure the
following:
• Enable/Disable: Click the Enable box to checkmark the box if you want to enable the FTP protocol. Click
to remove the checkmark to disable the protocol.
• Command Port: Change the port number used for FTP on the NAS share. Default is port 21.
• Client Code Type: Select the language input used for FTP commands.
• Protocol Type: Choose SFTP, Standard FTP, FTP over SSL (Explicit) or FTP over SSL (Implicit, Command
Port 990)
• Maximum Download Rate (KB/s): Use to limit FTP download speed. Default is no limit.
• Maximum Upload Rate (KB/s): Use to limit FTP upload speed. Default is no limit.
Click the Save button to change the FTP settings for the NAS share.
FTP Sengs
73
Promise Technology Management with WebPAM PROe