Promise Technology Vess R3600 Series - Making Iscsi CHAP Settings

Making iSCSI CHAP Settings
When you change CHAP settings, you must change the secret. You cannot change the type (peer or local).
To make iSCSI CHAP settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the CHAP tab.
4. Click the CHAP you want, then click the Modify button.
5. Make settings changes are required:
• Enter a name in the Name eld.
• Enter the current secret in the Current Secret eld.
• Enter a new secret of 12 to 16 characters in the Secret eld.
• Enter the new secret again in the Retype Secret eld.
6. Click the Save button.
Viewing a List of Logged-in Devices
Logged-in devices refers to all iSCSI devices currently logged into the Vess R3600. The device list includes:
To view a list of logged-in devices:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Logged In Device tab.
134
Promise Technology Vess R3600 / Vess J3600 Product Manual