To add a single user for the NAS
1. Click NAS Account tab > NAS User.
2. Click the Add New User button.
In the Add New User menu, enter the required settings:
• Name
• Display Name
• Password
• Retype Password
Additional information for the NAS User can also be entered at this time. These elds are not required:
• Email
• Department
• Telephone
Finally, enter a group name in Assign Primary Group if you plan to setup NAS User Groups:
3. Click the Submit button to apply and save the settings.
The newly created user appears listed in the NAS User list.
To add a multiple users for the NAS
There are two ways to add multiple users. One option is to use the procedure described below to use an
automatically indexed user name (ex. user01, user02, user03). Alternatively you can create and edit a .csv le to
and upload the le and apply the settings.
To add new users with the Wizard:
1. Click NAS Account tab > NAS User.
2. Click the Add Multiple Users button, choose the Wizard option in the new menu and click Next.
78
Promise Technology
Vess R3600 / Vess J3600 Product Manual
To Next Page
Loading...
Need help?
General
