Promise Technology Vess R3600 Series User Manual

ACL Setting
The Access Control List (ACL) rule-based access permission protocol is applied to a Share Disk when ACL
is enabled. To congure the rules for ACL, go to the NAS Share List menu, select the NAS Share you want to
congure, click on the Gear icon for that NAS Share, and select the ACL option. The ACL menu appears. You
will see the current ACL rule for the NAS Share. To clear the current settings, click on the Clear button to set the
ACL rules to default setting.
Access permission is listed after rules are added. To change the ACL conguration for the NAS share, click
on the ACL Settings button. The Apply Onto: pull-down menu is used to apply the rule to the entire NAS Share
(This folder and its subfolders) or to a selected folder in the NAS Share (This folder only). Click on Save to apply the new
conguration.
Note
Windows ACL must rst be enabled in the SMB settings. For instructions, see
“Using Windows ACL” on page 86.
ACL Sengs menu
84
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English