Promise Technology Vess R3600 Series - Making SLP Settings

Making SLP Settings
To change SLP service settings:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SLP service and select the Settings option.
4. Choose a startup type:
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
5. Click the Save button.
6. Type “CONFIRM” in the popup menu and click the Conrm button.
Webserver Service
Webserver service connects the WebPAM PROe interface to the RAID subsystem though your browser.
Stopping Webserver Service
To stop the Webserver service:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for Webserver service and select the Stop option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
To start the Webserver service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Start button.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
144
Promise Technology Vess R3600 / Vess J3600 Product Manual