The following settings apply to portals.
Requires -t portal and -g <portal id> options.
Adding a portal also requires -m <portal interface type> optioin.
vlantag = The VLAN tag of a portal in LAN-mode. Range is 1 to 4094.
trunkid = The Trunk ID of a portal in Trunk-mode. Range is 1 to 8.
dhcp = Enable or Disable DHCP on the portal.
enable
disable
iptype = The IP address type of portal.
4 IPv4
6 IPv6
primaryip = The primary IP address of portal. Use when DHCP is disabled.
primaryipmask = The primary IP mask of portal. Use when DHCP is disabled.
gateway = Specify the gateway.
tcpport = Specify the tcp port number.
porttype = The port type used to create portal.
Only valid for -m phy or vlan interface type.
io
mgmt
attribute = The portal mode.
io
advanced
-v Verbose mode. Used with -a list.
229
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
