Promise Technology Vess R3600 Series - Page 299

shutdown
Usage
shutdown -a <action> [-i <ctrlId>
shutdown -a shutdown
shutdown -a restart
shutdown -a restart -i 2
shutdown -a shutdown -i 1
Summary
Shutdown is the command used to shutdown or restart a controller or subsystem.
Options
-a <action> Which action to perform.
shutdown To shutdown the controller or subsystem.
restart To restart the controller or subsystem.
-i <ctrlId> Controller ID or subsystem. If -i is not specied, the default value is
subsystem.
1 Controller 1.
2 Controller 2.
subsys Subystem.
279
Promise Technology Managing with CLI