Promise Technology Vess R3600 Series User Manual

Examples
stats -t phydrv -i 0 -c 5
stats -a list -t all
stats -a clear
stats
Usage
stats [-t <type>] [-i <devId>] [-c <Count>]
stats -a clear
Summary
The stats command displays statistics of subsytem, controller, enclosure, physical drives, and logical drives; and
resets the statistics count to zero.
Options
-a <action> Species the action to perform.
list (Default) Displays the statistics.
clear Resets the statistics count to zero.
-t <type> Species the device type.
ctrl Controller.
phydrv Physical drive.
all All the above options.
-i <devId> Species the device ID. Default is the rst available device ID.
-c <Count> Species the device count. Default is all devices. Used with -a list.
285
Promise Technology Managing with CLI

Promise Technology Vess R3600 Series Specifications

General

Model	Vess R3600 Series
Form Factor	2U Rackmount
RAID Levels	0, 1, 5, 6, 10, 50, 60
Drive Type	SAS/SATA
Cache Memory	8GB
Processor	Intel Xeon
Power Supply	Redundant 800W power supplies
Cooling	Hot-swappable redundant fans
Controller	Dual redundant controllers
Memory	Up to 64GB DDR4

Summary

Introduction and Product Overview

Features

Key capabilities and benefits of the Vess R3600/J3600 Series storage solutions.

Models and Specifications

Details of Vess R3600 and J3600 models, including interface and power specifications.

Hardware Overview

Summary of front and back panel hardware features of Vess R3600 and J3600 enclosures.

Hardware Installation

Unpacking and Packing List

Instructions for unpacking the Vess R3600/J3600 and contents of the product box.

Rack Mounting Procedures

Step-by-step guide for securely installing the Vess enclosure into an equipment rack.

Physical Drive Installation

Detailed instructions for installing physical disk drives into the enclosure's carriers.

System Configuration

Management Connections

Methods for establishing serial and network management connections for system administration.

Data Connections

Configuration steps for iSCSI and Fibre Channel data connections for storage access.

WebPAM PROe Configuration

Guide to accessing and using the WebPAM PROe interface for system setup and management.

NAS Account and Domain Management

Procedures for managing NAS users, groups, and network domain configurations.

Command Line Interface (CLI) Management

Table of Supported Commands

Reference list of available CLI commands with brief descriptions of their actions.

Notes and Conventions

Explanation of CLI syntax, options, and usage conventions.