shortcut event subscription by shortcut. If the param have no value, it means that
the severity level of underling items are different.
enclosure event subscription by enclosure.
raid event subscription by RAID core.
host event subscription by host interface.
drive event subscription by drive interface.
other event subscription by other.
-s “<option>=<value>”
Following for shortcut type event subscription:
If params for shortcut type and corresponding underling items are both inputed in cli command. Make
sure they have the same severity level, or it will report conict.
enclosure = shortcut event subscription by enclosure.
raid = shortcut event subscription by raid core.
host = shortcut event subscription by host interface.
drive = shortcut event subscription by drive interface.
other = shortcut event subscription by other.
The range is (info | warning | minor | major | critical | fatal | none).
Default value is major.
Followings for enclosure type event subscription:
battery = battery event subscription of enclosure.
blower = blower event subscription of enclosure.
cu = Cooling Unit event subscription of enclosure.
psu = PSU event subscription of enclosure.
sep = SEP event subscription of enclosure.
temp = temperature event subscription of enclosure.
The range is (info | warning | minor | major | critical | fatal | none).
Default value is major.
287
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
