Promise Technology Vess R3600 Series - Page 323

name= Volume name.
capacity= Volume capacity.
For add action. If not specied for not thin-provision supported volume, it
means to use the max available capacity of the pool.
For mod action, it means to extend capacity of the volume. It must be
larger than original capacity.
block= Block size of the volume.
The possible parameters are 4KB, 8KB, 16KB, 32KB, 64KB and 128KB. If
not specied, the default 8KB will be used.
Only valid for add action.
sector= Sector size of the volume.
The possible parameters are 512B, 1KB, 2KB and 4KB.
If not specied, the default 512B will be used.
Only valid for add action.
sync= Sync mode of the volume.
standard
always (Defaults)
disabled
logbias= Slog behavior. If not specied, for block size is 64KB or 128KB, the default
thoughtput will be used. For other block size values, the default latency
will be used.
latency
throughput
thinprov= Thin-provision supported or not.
enable
disable
-f Force delete the volume.
303
Promise Technology Managing with CLI