Communications Protocol CubiScan 125 Command Set
CubiScan 125 97
Values
This command causes the CubiScan 125 to report all of its internal
parameters. This is useful for troubleshooting.
17 1 End of Text Control (ETX) 03h
18 1 Carriage Return Control (CR) 0Dh
19 1 Line Feed Control (LF) 0Ah
Negative Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Units Command Alpha (U) 55h
3 1 Neg. Acknowledge Alpha (N) 4Eh
4 1 End of Text Control (ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
6 1 Line Feed Control (LF) 0Ah
Pos Len Description Type Range ASCII
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Values Command Alpha (V) 56h
3 1 End of Text Control (ETX) 03h
4 1 Carriage Return Control (CR) 0Dh
5 1 Line Feed Control (LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Values Command Alpha (V) 56h
3 1 Acknowledge Alpha (A) 41h
4 4 Length DBW Numeric 00.0-99.9
8 1 Comma Alpha (,) 2Ch
To Next Page
Loading...
