CubiScan 125 5
Chapter 2
Setup
This chapter provides instructions for assembling and setting up the
CubiScan 125. Perform the steps to set up the CubiScan 125 in the
following order:
• Unpack the CubiScan 125 (page 5)
• Place the CubiScan 125 where you will be using it (page 8)
• Assemble the CubiScan 125 (page 9)
• Remove the shipping material (page 17)
• Connect the CubiScan 125 to a computer or network (optional)
(page 21)
• Connect power to the CubiScan 125 (page 32)
• Turn on the CubiScan 125 (page 21)
• Install the Qbit PC control software (optional) (page 32)
Unpacking
The CubiScan 125 is shipped in a single container with all compo-
nents. The glass platform is packed in a separate cardboard box
inside the crate.
Remove the wood slats and the packing material, and lift the Cubi-
Scan 125 components carefully from the crate. Do not remove the
To Next Page
Loading...
