Quantronix CubiScan 125 - Figure 28 System Settings, Fifth Screen

System Configuration Configuration
50 CubiScan 125
At this screen, you can enter an optional location code and pass-
word.
If you set up a password, it must be entered each time to access
the touch screen menu.
The location code is used to identify the CubiScan 125 in the
communications data. If you have more than one CubiScan 125,
you need to set up a unique location number for each one.
6. Tap
[Next] to go to the next screen.
From this screen you can enter the scale increments and amount
of precision of the scale.
Figure 28
System Settings, Fifth Screen