Connecting to a Computer or Network Setup
24 CubiScan 125
Installing and
Configuring the
USB Driver
You must install a driver on your computer before it can recognize
and communicate with the CubiScan 125 via the USB port. A
CD-ROM is provided with the CubiScan 125 containing an execut-
able file to load the USB driver. Complete the following steps to
install the driver.
The following instructions use screen illustrations from Microsoft
Windows XP. If your computer has a different operating system, the
screens may not look exactly like those shown, but the instructions
are the same.
1. Execute the file, USB Driver CS125.exe on the CD-ROM. A Zip
Self-Extractor dialog box is displayed.
2. Select
UnZip. The CubiScan 125 USB driver files are copied to
the folder C:\Program Files\CubiScan125USB.
3. With the CubiScan 125 turned on, connect the USB cable to
your computer’s USB port and to the USB port on the CubiScan
125. In the bottom right-hand corner of the monitor, a bubble
appears indicating that new hardware has been found.
To Next Page
Loading...
Need help?
General
