CubiScan 125 Command Set Communications Protocol
100 CubiScan 125
Weight Units
This command is used to set the weight units to either English
(pounds) or metric (kilograms) mode.
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Wgt. Unit Command Alpha (#) 23h
3 1 English or Metric Alpha (E/M) 45h or 4Dh
4 1 End of Text Control (ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
6 1 Line Feed Control (LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Wgt. Unit Command Alpha (#) 23h
3 1 Acknowledge Alpha (A) 41h
4 1 End of Text Control (ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
6 1 Line Feed Control (LF) 0Ah
Negative Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Wgt. Unit Command Alpha (#) 23h
3 1 Neg. Acknowledge Alpha (N) 4Eh
4 1 End of Text Control (ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
6 1 Line Feed Control (LF) 0Ah
To Next Page
Loading...
