Cubing and Weighing Operation
42 CubiScan 125
NOTE
Do not lean on or touch the CubiScan 125 platform or the package
while a package is being cubed and weighed. Any kind of contact
with the platform during the measurement process can alter the
weight or sensor reading.
3. Using the handle on the front of the measuring gate, pull the
gate slowly over the object using one of the methods described
at the beginning of this section.
NOTE
Do not move the gate too quickly across the platform. A gate speed
error is displayed on the touch screen if you move it too quickly.
☞
Figure 20
Measuring Gate
☞
To Next Page
Loading...
